Rex Silentium

This is the direct thread mount for the SEG12. Our SEG12 uses the standard 1.375-24 main thread at the back of the suppressor allowing for different mounting options. These direct thread chokes use the M22-0.75 external thread. The direct thread choke requires the M22-0.75 M22 Direct Thread Adapter for the back of the SEG12 suppressor, available HERE.  Key Features:NO SHELL OR BARREL LENGTH RESTRICTIONS0.730 Choke IDWeight: 1.5oz17-4PH Hardened Stainless with Black Nitride QPQ finish

Rex Silentium SEG12 Direct Thread M22-0.75 12ga Choke Mount Benelli/Beretta

'-0.75':7 '12ga':8 'bb':14,19 'benelli/beretta':11 'choke':9 'direct':4 'dt12':13,18 'dt12-bb':12,17 'm22':6 'mount':10 'rex':1,15 'seg12':3 'silentium':2,16 'thread':5

The RexQD is a robust system for quick attachment and detachment for suppressors. The patent pending design drives concentricity from the six tapered locking lugs. Truly a "quick" system, the RexQD incorporates a positive and audible locking click and a locking ring. The RexQD design keeps the moving parts out side the suppressor but also protected from dirt and debris. The locking ring provides for extreme retention in both brutal and precision environments. With the RexQD engaged and locking ring threaded into the back of the RexQD receiver, nothing is going to budge that can. Key Features:NO CARTRIDGE OR BARREL LENGTH RESTRICTIONSNO INTERNAL MOVING PARTS TO COOK INSIDE THE SUPPRESSOR!!!Works with any suppressor with a 1.375-24 main thread!!!Weight: 6oz (whole system, including suppressor mount!)Total length added to Suppressor and Host: 0.65"17-4PH Hardened Stainless with Black Nitride QPQ finishEasy to disassemble and service6 RexLOCK(tm) Tapered Lugs for positive locking and concentricity3 bearing surfaces: 2 precision axles and 1 taper (MAXIMUM LOCKUP AND ALIGNMENT!)Real Fast attach (with audible click) and detach!!!Patent: US11486670B1

Rex Silentium RexQD - 6 Lug RexLOCK 5/8-24 Muzzle Device Quick Attach Detach System GEN3

'5/8-24':7 '6':4 'attach':11 'detach':12 'devic':9 'gen3':14 'lug':5 'muzzl':8 'quick':10 'rex':1,18 'rexlock':6 'rexqd':3 'rqd':16,21 'rqd-set625':15,20 'set625':17,22 'silentium':2,19 'system':13

Rex Silentium RexQD - 6 Lug RexLOCK 1/2-28 Muzzle Device Quick Attach Detach System GEN3

'1/2-28':7 '6':4 'attach':11 'detach':12 'devic':9 'gen3':14 'lug':5 'muzzl':8 'quick':10 'rex':1,18 'rexlock':6 'rexqd':3 'rqd':16,21 'rqd-set500':15,20 'set500':17,22 'silentium':2,19 'system':13

Standing on the shoulders of the GEN3 Fidelis Rifle Suppressor, the MG10 pushes the suppression-centric design further. Now in a tubeless embodiment, we have leveraged the years of development and testing to craft a tough, light and above all, quiet suppressor.Ready to take on your wildest host, whether a wildcat, ultra magnum, Weatherby magnum or just a vanilla 30 caliber, the MG10 can handle whatever punishment you choose. Backed by our lifetime, no bullshit warranty we designed the MG10 to be easily recored should you ever have any problems. The serial number and engraving is at the very back of the suppressor body. This is the safest place in the event of a baffle strike. If you ever damage to the suppressor we can recore it fast and return it to factory new condition in a matter of days.Precision CNC machined from 100% 17-4PH stainless steel, fully welded then hardened to the max. The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi. Go ahead... mag dump, bump fire or swing your selector to full auto. This suppressor is ready to last a lifetime or two or three!In addition to the design of the suppressor itself, we also made our assembly systems easily adaptable to custom orders. If you need a special bore size for your host firearm or even a special length, we can build it for you. Our manufacturing cells are flexible enough to accommodate one-off custom assemblies. We can even customize your serial number.The MG10 and all of our rifle suppressors are compatible with industry standard quick disconnect (QD) mounts. The main thread on the back of the suppressor is 1.375-24. There are many options for QD mounts on the market. Key Features and Specs:Tubeless & Fully WeldedIndustry Standard 1.375-24 Main Thread MountIncludes a 5/8-24 direct thread mount (others available here)100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile8.6" Overall length19.8oz1.70" DiameterUnique RAW Flat Bronze Heat Treated FinishFull Auto RatedNo Barrel Length RestrictionsEasy to RecoreLifetime, No BS Warranty Suppression Performance Data by Cartridge and Barrel Length:Sound Pressure Level (peak db) measured 1M (39.375") left of suppressor muzzle and 62" above ground 223 Remington (5.56 NATO)10.5" Barrel:24" Barrel:  308 Winchester (7.62 NATO)20" Barrel:12.5" Barrel: 300 Blackout (subsonic)16" Barrel:  9MM (subsonic )Kriss Vector: 338 Lapua26" Barrel: 458 SOCOM (subsonic)8" Barrel:  45-7020" Barrel:  450 Bushmaster16" Barrel: Compatible Cartridges for this suppressor:8.6 Blackout17 Hornet17 Rem. Fireball17 Remington20 Vartarg20 Vartarg Turbo20 Tactical204 Ruger20 PPC20 BR22 Hornet218 Bee221 Fireball222 Remington223 Remington222 Rem. Mag.219 Zipper22 Valkyrie22 Nosler225 Winchester22-250 Rem.220 Swift223 WSSM6mm x 456mm PPC6mm BR Rem.6mm BR Norma6mm XC243 Winchester6mm Remington243 WSSM240 Wby. Mag.256 Win. Mag.25-35 Win.250-3000 Savage257 Roberts & +P257 Roberts AI25 WSSM25-06 Remington257 Wby. Mag.6.5 Grendel6.5mmx50 Ariska6.5mmx47 Lapua6.5 Creedmoor260 Remington6.5x55 Swede6.5x284 Win.6.5x284 Norma6.5 Rem. Mag.264 Win. Mag.6.8 SPC270 Winchester270 WSM270 Wby. Mag.7mm-30 Waters7x57mm Mauser7mm-08 Rem.284 Winchester280 Remington7mm RSAUM7mm Rem. Mag.7mm WSM7mm STW28 Nosler30 M1 Carbine300 AAC Blackout30 BR Remington30-30 Win.30 Remington AR300 Savage307 Winchester308 Marlin Express30 T/C308 Winchester30-06 Springfield300 H&H Mag.300 RCM300 RSAUM300 WSM308 Norma Mag.300 Win. Mag.300 Wby. Mag.30 Nosler300 Norma Mag.300 RUM7.62x39 Russian7.65x53 Mauser303 British7.7x58 Arisaka7.62x54R Russia8x57mm JS8mm-06325 WSM8mm Rem. Mag.338 Federal338-06338 RCM338 Win. Mag.340 Wby. Mag.338 RUM338 Lapua348 Winchester356 Winchester35 Remington358 Winchester35 Whelen375 Ruger375 H&H Mag.375 RUM416 Rem. Mag.444 Marlin450 Bushmaster458 SOCOM45-70 Government458 Win. Mag.458 Lott

Rex Silentium MG10 Ultra Rifle Suppressor 458

'-458':9,13 '458':7 'mg10':3,8,12 'rex':1,10 'rifl':5 'silentium':2,11 'suppressor':6 'ultra':4

Standing on the shoulders of the GEN3 Fidelis Rifle Suppressor, the MG10 pushes the suppression-centric design further. Now in a tubeless embodiment, we have leveraged the years of development and testing to craft a tough, light and above all, quiet suppressor.Ready to take on your wildest host, whether a wildcat, ultra magnum, Weatherby magnum or just a vanilla 30 caliber, the MG10 can handle whatever punishment you choose. Backed by our lifetime, no bullshit warranty we designed the MG10 to be easily recored should you ever have any problems. The serial number and engraving is at the very back of the suppressor body. This is the safest place in the event of a baffle strike. If you ever damage to the suppressor we can recore it fast and return it to factory new condition in a matter of days.Precision CNC machined from 100% 17-4PH stainless steel, fully welded then hardened to the max. The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi. Go ahead... mag dump, bump fire or swing your selector to full auto. This suppressor is ready to last a lifetime or two or three!In addition to the design of the suppressor itself, we also made our assembly systems easily adaptable to custom orders. If you need a special bore size for your host firearm or even a special length, we can build it for you. Our manufacturing cells are flexible enough to accommodate one-off custom assemblies. We can even customize your serial number.The MG10 and all of our rifle suppressors are compatible with industry standard quick disconnect (QD) mounts. The main thread on the back of the suppressor is 1.375-24. There are many options for QD mounts on the market. Key Features and Specs:Tubeless & Fully WeldedIndustry Standard 1.375-24 Main Thread MountIncludes a 5/8-24 direct thread mount (others available here)100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile8.6" Overall length19.8oz1.70" DiameterUnique RAW Flat Bronze Heat Treated FinishFull Auto RatedNo Barrel Length RestrictionsEasy to RecoreLifetime, No BS Warranty Suppression Performance Data by Cartridge and Barrel Length:Sound Pressure Level (peak db) measured 1M (39.375") left of suppressor muzzle and 62" above ground 223 Remington (5.56 NATO)10.5" Barrel: 136.4024" Barrel: 130.54  308 Winchester (7.62 NATO)20" Barrel: 137.2212.5" Barrel: 138.95 300 Blackout (subsonic)16" Barrel: 123.64  338 Lapua26" Barrel: 138.73 Compatible Cartridges for this suppressor:8.6 Blackout17 Hornet17 Rem. Fireball17 Remington20 Vartarg20 Vartarg Turbo20 Tactical204 Ruger20 PPC20 BR22 Hornet218 Bee221 Fireball222 Remington223 Remington222 Rem. Mag.219 Zipper22 Valkyrie22 Nosler225 Winchester22-250 Rem.220 Swift223 WSSM6mm x 456mm PPC6mm BR Rem.6mm BR Norma6mm XC243 Winchester6mm Remington243 WSSM240 Wby. Mag.256 Win. Mag.25-35 Win.250-3000 Savage257 Roberts & +P257 Roberts AI25 WSSM25-06 Remington257 Wby. Mag.6.5 Grendel6.5mmx50 Ariska6.5mmx47 Lapua6.5 Creedmoor260 Remington6.5x55 Swede6.5x284 Win.6.5x284 Norma6.5 Rem. Mag.264 Win. Mag.6.8 SPC270 Winchester270 WSM270 Wby. Mag.7mm-30 Waters7x57mm Mauser7mm-08 Rem.284 Winchester280 Remington7mm RSAUM7mm Rem. Mag.7mm WSM7mm STW28 Nosler30 M1 Carbine300 AAC Blackout30 BR Remington30-30 Win.30 Remington AR300 Savage307 Winchester308 Marlin Express30 T/C308 Winchester30-06 Springfield300 H&H Mag.300 RCM300 RSAUM300 WSM308 Norma Mag.300 Win. Mag.300 Wby. Mag.30 Nosler300 Norma Mag.300 RUM7.62x39 Russian7.65x53 Mauser303 British7.7x58 Arisaka7.62x54R Russia8x57mm JS8mm-06325 WSM8mm Rem. Mag.338 Federal338-06338 RCM338 Win. Mag.340 Wby. Mag.338 RUM338 Lapua348 Winchester356 Winchester35 Remington358 Winchester35 Whelen

Rex Silentium MG10 Ultra Rifle Suppressor 358

'-358':9,13 '358':7 'mg10':3,8,12 'rex':1,10 'rifl':5 'silentium':2,11 'suppressor':6 'ultra':4

Standing on the shoulders of the GEN3 Fidelis Rifle Suppressor, the MG10 pushes the suppression-centric design further. Now in a tubeless embodiment, we have leveraged the years of development and testing to craft a tough, light and above all, quiet suppressor.Ready to take on your wildest host, whether a wildcat, ultra magnum, Weatherby magnum or just a vanilla 30 caliber, the MG10 can handle whatever punishment you choose. Backed by our lifetime, no bullshit warranty we designed the MG10 to be easily recored should you ever have any problems. The serial number and engraving is at the very back of the suppressor body. This is the safest place in the event of a baffle strike. If you ever damage to the suppressor we can recore it fast and return it to factory new condition in a matter of days.Precision CNC machined from 100% 17-4PH stainless steel, fully welded then hardened to the max. The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi. Go ahead... mag dump, bump fire or swing your selector to full auto. This suppressor is ready to last a lifetime or two or three!In addition to the design of the suppressor itself, we also made our assembly systems easily adaptable to custom orders. If you need a special bore size for your host firearm or even a special length, we can build it for you. Our manufacturing cells are flexible enough to accommodate one-off custom assemblies. We can even customize your serial number.The MG10 and all of our rifle suppressors are compatible with industry standard quick disconnect (QD) mounts. The main thread on the back of the suppressor is 1.375-24. There are many options for QD mounts on the market. Key Features and Specs:Tubeless & Fully WeldedIndustry Standard 1.375-24 Main Thread MountIncludes a 5/8-24 direct thread mount (others available here)100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile8.6" Overall length19.8oz1.70" DiameterUnique RAW Flat Bronze Heat Treated FinishFull Auto RatedNo Barrel Length RestrictionsEasy to RecoreLifetime, No BS WarrantySuppression Performance Data by Cartridge and Barrel Length:Sound Pressure Level (peak db) measured 1M (39.375") left of suppressor muzzle and 62" above ground  223 Remington (5.56 NATO)10.5" Barrel: 133.5824" Barrel: 127.44  308 Winchester (7.62 NATO)20" Barrel: 135.8712.5" Barrel: 136.02 300 Blackout (subsonic)16" Barrel: 118.86 Compatible Cartridges for this suppressor:17 Hornet17 Rem. Fireball17 Remington20 Vartarg20 Vartarg Turbo20 Tactical204 Ruger20 PPC20 BR22 Hornet218 Bee221 Fireball222 Remington223 Remington222 Rem. Mag.219 Zipper22 Valkyrie22 Nosler225 Winchester22-250 Rem.220 Swift223 WSSM6mm x 456mm PPC6mm BR Rem.6mm BR Norma6mm XC243 Winchester6mm Remington243 WSSM240 Wby. Mag.256 Win. Mag.25-35 Win.250-3000 Savage257 Roberts & +P257 Roberts AI25 WSSM25-06 Remington257 Wby. Mag.6.5 Grendel6.5mmx50 Ariska6.5mmx47 Lapua6.5 Creedmoor260 Remington6.5x55 Swede6.5x284 Win.6.5x284 Norma6.5 Rem. Mag.264 Win. Mag.6.8 SPC270 Winchester270 WSM270 Wby. Mag.7mm-30 Waters7x57mm Mauser7mm-08 Rem.284 Winchester280 Remington7mm RSAUM7mm Rem. Mag.7mm WSM7mm STW28 Nosler30 M1 Carbine300 AAC Blackout30 BR Remington30-30 Win.30 Remington AR300 Savage307 Winchester308 Marlin Express30 T/C308 Winchester30-06 Springfield300 H&H Mag.300 RCM300 RSAUM300 WSM308 Norma Mag.300 Win. Mag.300 Wby. Mag.30 Nosler300 Norma Mag.300 RUM7.62x39 Russian7.65x53 Mauser303 British7.7x58 Arisaka7.62x54R Russian

Rex Silentium MG10 Ultra Rifle Suppressor 308

'-308':9,13 '308':7 'mg10':3,8,12 'rex':1,10 'rifl':5 'silentium':2,11 'suppressor':6 'ultra':4

Quiet and tough in a modular package...Ready to take on your wildest host, whether a wildcat, ultra magnum, Weatherby magnum or just a vanilla caliber, the MOD X can handle whatever punishment you choose. Backed by Rex Silentium's lifetime, no bullshit warranty, they designed the MOD X to be easily recored should you ever have any problems. The serial number and engraving is at the very back of the suppressor body. This is the safest place in the event of a baffle strike. If you ever damage to the suppressor Rex Silentium can recore it fast and return it to factory new condition in a matter of days.Precision CNC machined from 100% 17-4PH stainless steel, fully welded then hardened to the max. The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi. Go ahead... mag dump, bump fire or swing your selector to full auto. This suppressor is ready to last a lifetime or two or three!In addition to the design of the suppressor itself, Rex Silentium also made their assembly systems easily adaptable to custom orders. If you need a special bore size for your host firearm or even a special length, they can build it for you. Rex Silentium's manufacturing cells are flexible enough to accommodate one-off custom assemblies.The MOD X and all of Rex Silentium's rifle suppressors are compatible with industry standard quick disconnect (QD) mounts. The main thread on the back of the suppressor is 1.375-24. There are many options for QD mounts on the market.Key Features & SpecsTubeless & fully welded base and moduleAll baffle geometries align in module and base assembliesShort K length & magnum length in one assemblyMicro low angle locking taper on module and end cap for positive alignment, locking and sealingRemovable & replaceable end capIndustry standard 1.375x24 main thread mount compatible with many QD systemsIncludes a 5/8x25 direct thread mount100% 17-4PH stainless steel hardened to 45-47Rc at 190,000psi tensile8.8" overall length1.7" diameterUnique RAW flat dark bronze finishFull auto ratedNo barrel length restrictionsEasy to recore with engraving at the back of the canLifetime, no BS warranty

Rex Silentium Mod X,  308cal, Suppressor

'-308':8,12 '308cal':5 'mod':3 'modx':7,11 'rex':1,9 'silentium':2,10 'suppressor':6 'x':4

The MG22 was born of the MG Series rifle suppressors.  100% hardened 17-4 stainless steel (190KSI tensile strength) for extreme duty and high volume shooting in all rimfire cartridges.  No aluminum to damage by either excessive shooting or lack of cleaning!  Designed for up to nine length configurations, it allows the user to tune the weight and desired suppression level to their liking.  It is built to run and run.Clean it or not, it will take it.  Go ahead, scrape off the baffles with your pocket knife.  The MG22 doesn't care!A 100% no-fault lifetime warranty comes standard, as with all of Rex Silentium's products.  If you kill it, they fix it, no BS!Key FeaturesRated for (no barrel length restrictions):.22lr.22wmr.17hmr.17wsm5.7x28mm.22 hornetLength: 6.5"Approximately 0.47" per baffleConfigure from one to ten bafflesWeight: 7.4ozEach baffle weights 0.6oz100% hardened 17-4 stainless steel (hardened to 190,000 PSI tensile strength) takes all the extreme abrasion and high pressuresBaffles seal to each other via tapers for concentricityBlack nitride finish for even easier cleaning and durabilityFull auto ratedEasy to service and reconfigureEasy to own100% no-fault warranty, valid across the known universe and until the end of timeWon't break the bank

Rex Silentium MG22, .22cal, Modular Suppressor

'22cal':4 'mg22':3,7,10 'modular':5 'rex':1,8 'silentium':2,9 'suppressor':6

This is the direct thread mount for the SEG12. Our SEG12 uses the standard 1.375-24 main thread at the back of the suppressor allowing for different mountiThe Low Profile Direct Thread Mount allows for less overall length and weight to the suppressor and host firearm. Designed to be rigid, it is cut from 17-4 Stainless Steel and then heat treated to 190,000 PSI tensile strength and 47 Rc hardness. It is one tough and concentric mount. It adds only 0.100" to your suppressor. Works with any suppressor with the de facto standard 1.375-24 mount thread.ng options. These direct thread chokes use the M22-0.75 external thread.

Rex Silentium SEG 12 Choke Adaptor for Invector-Plus

'12':4 'adaptor':6 'choke':5 'dt12':12,18 'dt12-invp-m22':11,17 'invector':9 'invector-plus':8 'invp':13,19 'm22':14,20 'plus':10 'rex':1,15 'seg':3 'silentium':2,16

Simplicity!  So many ways to configure this suppressor!Key FeaturesFull configuration is 8.6" long at 11oz (including Universal Booster Assembly)One tax stamp, many configurationsRated for:9mm.300blk subsonic.380acp.32acp.25acp.22lrIncludes 1/2x28 piston and universal boosterHardened, black nitrided 17-4 stainless steel universal booster assembly takes most of the abrasionBaffles thread together for many configurations and baffle rotation for added lifeRepairable high-strength high-temperature silicone rubber cap wipe Uses most standard 1.375x24 mounts and QD systems for fixed barrel hostsNew replacement parts availableEasy to service and reconfigureEasy to own100% no-fault warranty, valid across the known universe and until the end of timeWon't break the bank***This suppressor comes with a red wipe installed behind the end cap.  DO NOT shoot hollow point or expanding ammo unless this wipe is removed first  When using the wipe in any configuration, only shoot full metal jacket ammo.***A 100% no-fault lifetime warranty comes standard, as with all of Rex Silentium's products.For best and critical suppression, use the shortest barrel available with subsonic velocity 9mm FMJ, no hollow points with the wipe installed.  Keep it clean and remember that after cleaning use some ablative gel (petroleum jelly or similar) on all internal parts before reassembly.  The wipe can easily be replaced as a repair item by you or a gunsmith.

Rex Silentium SEG H Gen 2, 9mm, Suppressor

'-9':10,14 '2':6 '9mm':7 'gen':5 'h':4 'rex':1,11 'seg':3 'segh2':9,13 'silentium':2,12 'suppressor':8

Simplicity!  So many ways to configure this suppressor!Key FeaturesFull configuration is 8.6" long at 11oz (including universal booster assembly)One tax stamp, many configurationsRated for:.45acp.458 SOCOM subsonic.40 S&W10mm9mm.300blk subsonic.380acp.32acp.25acp.22lr.17hmrIncludes 0.578x28 piston and universal boosterHardened, black nitrided 17-4 stainless steel universal booster assembly takes most of the abrasionBaffles thread together for many configurations and baffle rotation for added lifeRepairable high-strength high-temperature silicone rubber cap wipeUses most standard 1.375x24 mounts and QD systems for fixed barrel hostsNew replacement parts availableEasy to service and reconfigureEasy to own100% no-fault warranty, valid across the known universe and until the end of timeWon't break the bank***This suppressor comes with a red wipe installed behind the end cap.  DO NOT shoot hollow point or expanding ammo unless this wipe is removed first  When using the wipe in any configuration, only shoot full metal jacket ammo.***A 100% no-fault lifetime warranty comes standard, as with all of Rex Silentium's products.For best and critical suppression, use the shortest barrel available with subsonic velocity FMJ, no hollow points with the wipe installed.  Keep it clean and remember that after cleaning use some ablative gel (petroleum jelly or similar) on all internal parts before reassembly.  The wipe can easily be replaced as a repair item by you or a gunsmith.

Rex Silentium SEG H Gen 2, .45cal, Suppressor

'2':6 '45a':11,16 '45cal':7 'gen':5 'h':4 'rex':1,12 'seg':3 'segh2':10,15 'segh2-45a':9,14 'silentium':2,13 'suppressor':8

Standing on the shoulders of the GEN3 Honoris Rifle Suppressor, the MG7 pushes the suppression-centric design further. Now in a tubeless embodiment, we have leveraged the years of development and testing to craft a tough, light and above all, quiet suppressor.The MG7 was designed for more discreet and tactical use. It is a compact, light and stout package for maximum suppression of subsonic rifle, pistol and small case supersonic rifle cartridges. Though, if you wish, you can put it on anything of magnum stature, just don't expect the sound reduction like its big brother, the MG10 Ultra Rifle Suppressor. Ready for extreme full auto, the MG7 is not just a tactical rifle suppressor, it is quite happy on your hunting rifle too. The light weight and easy maneuverability make it great in the field.Backed by our lifetime, no bullshit warranty we designed the MG7 to be easily recored should you ever have any problems. The serial number and engraving is at the very back of the suppressor body. This is the safest place in the event of a baffle strike. If you ever damage to the suppressor we can recore it fast and return it to factory new condition in a matter of days.Precision CNC machined from 100% 17-4PH stainless steel, fully welded then hardened to the max. The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi. Go ahead... mag dump, bump fire or swing your selector to full auto. This suppressor is ready to last a lifetime or two or three!In addition to the design of the suppressor itself, we also made our assembly systems easily adaptable to custom orders. If you need a special bore size for your host firearm or even a special length, we can build it for you. Our manufacturing cells are flexible enough to accommodate one-off custom assemblies. We can even customize your serial number.The MG7 and all of our rifle suppressors are compatible with industry standard quick disconnect (QD) mounts. The main thread on the back of the suppressor is 1.375-24. There are many options for QD mounts on the market. Key Features and Specs:Tubeless & Fully WeldedIndustry Standard 1.375-24 Main Thread MountIncludes a 5/8-24 direct thread mount (others available here)100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile5.6" Overall length12.1oz1.70" DiameterUnique RAW Flat Bronze Heat Treated FinishFull Auto RatedNo Barrel Length RestrictionsEasy to RecoreLifetime, No BS Warranty Suppression Performance Data by Cartridge and Barrel Length:Sound Pressure Level (peak db) measured 1M (39.375") left of suppressor muzzle and 62" above ground 223 Remington (5.56 NATO)10.5" Barrel:24" Barrel:  308 Winchester (7.62 NATO)20" Barrel:12.5" Barrel: 300 Blackout (subsonic)16" Barrel:  9MM (subsonic )Glock 19:Kriss Vector: 45 ACP (subsonic)XDm:S&W M&P: 338 Lapua26" Barrel: 156.81 458 SOCOM (subsonic)8" Barrel: 45-7020" Barrel:   450 Bushmaster16" Barrel: Compatible Cartridges for this suppressor:8.6 Blackout17 Hornet17 Rem. Fireball17 Remington20 Vartarg20 Vartarg Turbo20 Tactical204 Ruger20 PPC20 BR22 Hornet218 Bee221 Fireball222 Remington223 Remington222 Rem. Mag.219 Zipper22 Valkyrie22 Nosler225 Winchester22-250 Rem.220 Swift223 WSSM6mm x 456mm PPC6mm BR Rem.6mm BR Norma6mm XC243 Winchester6mm Remington243 WSSM240 Wby. Mag.256 Win. Mag.25-35 Win.250-3000 Savage257 Roberts & +P257 Roberts AI25 WSSM25-06 Remington257 Wby. Mag.6.5 Grendel6.5mmx50 Ariska6.5mmx47 Lapua6.5 Creedmoor260 Remington6.5x55 Swede6.5x284 Win.6.5x284 Norma6.5 Rem. Mag.264 Win. Mag.6.8 SPC270 Winchester270 WSM270 Wby. Mag.7mm-30 Waters7x57mm Mauser7mm-08 Rem.284 Winchester280 Remington7mm RSAUM7mm Rem. Mag.7mm WSM7mm STW28 Nosler30 M1 Carbine300 AAC Blackout30 BR Remington30-30 Win.30 Remington AR300 Savage307 Winchester308 Marlin Express30 T/C308 Winchester30-06 Springfield300 H&H Mag.300 RCM300 RSAUM300 WSM308 Norma Mag.300 Win. Mag.300 Wby. Mag.30 Nosler300 Norma Mag.300 RUM7.62x39 Russian7.65x53 Mauser303 British7.7x58 Arisaka7.62x54R Russia8x57mm JS8mm-06325 WSM8mm Rem. Mag.338 Federal338-06338 RCM338 Win. Mag.340 Wby. Mag.338 RUM338 Lapua348 Winchester356 Winchester35 Remington358 Winchester35 Whelen375 Ruger375 H&H Mag.375 RUM416 Rem. Mag.444 Marlin450 Bushmaster458 SOCOM45-70 Government458 Win. Mag.458 Lott

Rex Silentium MG7 K Rifle Suppressor 458

'-458':9,13 '458':7 'k':4 'mg7':3,8,12 'rex':1,10 'rifl':5 'silentium':2,11 'suppressor':6

Standing on the shoulders of the GEN3 Honoris rifle suppressor, the MG7 pushes the suppression-centric design further.  Now in a tubeless embodiment, Rex Silentium has leveraged the years of development and testing to craft a tough, light, and above all, quiet suppressor.  The MG7 was designed for more discreet and tactical use.  It is a compact, light, and stout package for maximum suppression of subsonic rifle, pistol, and small case supersonic rifle cartridges.  Though, if you wish, you can put it on anything of magnum stature, just don't expect the sound reduction like its big brother, the MG10 Ultra rifle suppressor.  Ready for extreme full auto, the MG7 is not just a tactical rifle suppressor, it is quite happy on your hunting rifle too.  The light weight and easy maneuverability make it great in the field.Back by Rex Silentium's lifetime, no BS warranty, they designed the MG7 to be easily recored should you ever have any problems.  The serial number and engraving is at the very back of the suppressor body.  This is the safest place in the event of a baffle strike.  If you ever damage the suppressor, Rex Silentium can recore it fast and return it to factory new condition in a matter of days.Precision CNC machined from 100% 17-4PH stainless steel, fully welded then hardened to the max.  The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi.  Go ahead... mag dump, bump fire, or swing your selector to full auto.  This suppressor is ready to last a lifetime or two... or three!The MG7 is compatible with industry standard quick disconnect (QD) mounts.  The main thread on the back of the suppressor is 1.375x24.  There are many options for QD mounts on the market.Key Features & SpecsTubeless & fully weldedIndustry standard 1.375x24 main thread mountIncludes 1/2x28 direct thread mount100% 17-4PH stainless steel hardened to 45-47Rc at 190,000psi tensile5.5" overall length11.3oz (no mount)1.7" diameterUnique RAW flat bronze heat treated finishFull auto ratedNo barrel length restrictionsEasy to recoreLimited, no BS warranty

Rex Silentium MG7 K Gen 9, .358cal, Suppressor

'-358':10,14 '358cal':7 '9':6 'gen':5 'k':4 'mg7':3,9,13 'rex':1,11 'silentium':2,12 'suppressor':8

Standing on the shoulders of the GEN3 Honoris rifle suppressor, the MG7 pushes the suppression-centric design further.  Now in a tubeless embodiment, Rex Silentium has leveraged the years of development and testing to craft a tough, light, and above all, quiet suppressor.  The MG7 was designed for more discreet and tactical use.  It is a compact, light, and stout package for maximum suppression of subsonic rifle, pistol, and small case supersonic rifle cartridges.  Though, if you wish, you can put it on anything of magnum stature, just don't expect the sound reduction like its big brother, the MG10 Ultra rifle suppressor.  Ready for extreme full auto, the MG7 is not just a tactical rifle suppressor, it is quite happy on your hunting rifle too.  The light weight and easy maneuverability make it great in the field.Back by Rex Silentium's lifetime, no BS warranty, they designed the MG7 to be easily recored should you ever have any problems.  The serial number and engraving is at the very back of the suppressor body.  This is the safest place in the event of a baffle strike.  If you ever damage the suppressor, Rex Silentium can recore it fast and return it to factory new condition in a matter of days.Precision CNC machined from 100% 17-4PH stainless steel, fully welded then hardened to the max.  The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi.  Go ahead... mag dump, bump fire, or swing your selector to full auto.  This suppressor is ready to last a lifetime or two... or three!The MG7 is compatible with industry standard quick disconnect (QD) mounts.  The main thread on the back of the suppressor is 1.375x24.  There are many options for QD mounts on the market.Key Features & SpecsTubeless & fully weldedIndustry standard 1.375x24 main thread mountIncludes 5/8x24 direct thread mount100% 17-4PH stainless steel hardened to 45-47Rc at 190,000psi tensile5.5" overall length11.3oz (no mount)1.7" diameterUnique RAW flat bronze heat treated finishFull auto ratedNo barrel length restrictionsEasy to recoreLimited, no BS warranty

Rex Silentium MG7 K Gen 9, .308cal, Suppressor

'-308':10,14 '308cal':7 '9':6 'gen':5 'k':4 'mg7':3,9,13 'rex':1,11 'silentium':2,12 'suppressor':8

Rex Silentium MG7 K Gen 9, .224cal, Suppressor

'-224':10,14 '224cal':7 '9':6 'gen':5 'k':4 'mg7':3,9,13 'rex':1,11 'silentium':2,12 'suppressor':8

Rex Silentium Mod X, .458cal, Suppressor

'-458':8,12 '458cal':5 'mod':3 'modx':7,11 'rex':1,9 'silentium':2,10 'suppressor':6 'x':4

Quiet and tough in a modular package...One tax stamp for an MG10 and MG7? Basically, YES!!! All the same MG goodness at massive savings!Ready to take on your wildest host, whether a wildcat, ultra magnum, Weatherby magnum or just a vanilla caliber, the MOD X can handle whatever punishment you choose. Backed by our lifetime, no bullshit warranty we designed the MOD X to be easily recored should you ever have any problems. The serial number and engraving is at the very back of the suppressor body. This is the safest place in the event of a baffle strike. If you ever damage to the suppressor we can recore it fast and return it to factory new condition in a matter of days.Precision CNC machined from 100% 17-4PH stainless steel, fully welded then hardened to the max. The final result is a suppressor with a hardness of 45-47Rc and tensile strength of 190,000psi. Go ahead... mag dump, bump fire or swing your selector to full auto. This suppressor is ready to last a lifetime or two or three!In addition to the design of the suppressor itself, we also made our assembly systems easily adaptable to custom orders. If you need a special bore size for your host firearm or even a special length, we can build it for you. Our manufacturing cells are flexible enough to accommodate one-off custom assemblies. We can even customize your serial number.The MOD X and all of our rifle suppressors are compatible with industry standard quick disconnect (QD) mounts. The main thread on the back of the suppressor is 1.375-24. There are many options for QD mounts on the market.  Key Features and Specs:Tubeless & Fully Welded Base and ModuleAll baffle geometries align in module and base assembliesShort K length & Magnum length in one assembly (like two cans for one stamp)Witness marks on both Base and Module with visual GO NO-GO indicatorMicro Low Angle Locking Taper on Module and End Cap for positive alignment, locking and sealingRemovable & Replaceable End Cap (available here)Industry Standard 1.375-24 Main Thread Mount compatible with many QD SystemsIncludes a 5/8-24 direct thread mount (others available here)100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile8.8" Overall lengthXXXoz1.70" DiameterUnique RAW Flat Dark Bronze FinishFull Auto RatedNo Barrel Length RestrictionsEasy to Recore with engraving at the back of the canLifetime, No BS Warranty Suppression Performance Data by CartridgeSound Pressure Level (peak db) measured 1M (39.375") left of suppressor muzzle and 62" above ground Compatible Cartridges for this suppressor:8.6 Blackout17 Hornet17 Rem. Fireball17 Remington20 Vartarg20 Vartarg Turbo20 Tactical204 Ruger20 PPC20 BR22 Hornet218 Bee221 Fireball222 Remington223 Remington222 Rem. Mag.219 Zipper22 Valkyrie22 Nosler225 Winchester22-250 Rem.220 Swift223 WSSM6mm x 456mm PPC6mm BR Rem.6mm BR Norma6mm XC243 Winchester6mm Creedmoor243 WSSM240 Wby. Mag.256 Win. Mag.25-35 Win.250-3000 Savage257 Roberts & +P257 Roberts AI25 WSSM25-06 Remington257 Wby. Mag.6.5 Grendel6.5mmx50 Ariska6.5mmx47 Lapua6.5 Creedmoor260 Remington6.5x55 Swede6.5x284 Win.6.5x284 Norma6.5 Rem. Mag.264 Win. Mag.6.8 SPC270 Winchester270 WSM270 Wby. Mag.7mm-30 Waters7x57mm Mauser7mm-08 Rem.284 Winchester280 Remington7mm RSAUM7mm Rem. Mag.7mm WSM7mm STW28 Nosler30 M1 Carbine300 AAC Blackout30 BR Remington30-30 Win.30 Remington AR300 Savage307 Winchester308 Marlin Express30 T/C308 Winchester30-06 Springfield300 H&H Mag.300 RCM300 RSAUM300 WSM308 Norma Mag.300 Win. Mag.300 Wby. Mag.30 Nosler300 Norma Mag.300 RUM7.62x39 Russian7.65x53 Mauser303 British7.7x58 Arisaka7.62x54R Russian

Rex Silentium MOD X Modular Rifle Suppressor 358

'-358':10,14 '358':8 'mod':3 'modular':5 'modx':9,13 'rex':1,11 'rifl':6 'silentium':2,12 'suppressor':7 'x':4

Taming the 3/4 bore...The SEG12 brings a new and radical concept to the shotgun world. No special tools, just a good solid grip and you can reconfigure or clean the suppressor in the field. No rods, no screws, no problem. Half of the 8 aluminum baffles have a patent pending 17-4 SS liner that is permanently locked inside the baffle. Simply alternate the baffle arrangement from the back of the can forward and you have a hearing safe shotgun can. Additionally, there are no shell, load or barrel length restrictions. This design guides the payload from baffle to baffle. And, with the help of the RexQD choke system, attaching and detaching the SEG12 only take a few seconds! For now, we are running cylinder bore at 0.730" for all the baffles. We will offer different end caps with tighter constrictions at a later date. This initial release will include one RexQD Choke Mount in either Win/Moss/Inv or Rem threads. Benelli/Beretta, VEPR, Saiga and other mounts will come out soon!Key Features and Specs:8 Modular baffles plus end cap for many configurationsPatent pending 17-4SS baffle liners that guide the payloadNo restrictions on shell, load or barrel length (follow your host firearm instructions and limits!)1.375-24 thread mount system for direct thread mounts (coming soon) and the RexQD systemMicro Low Angle Locking Taper thoughout for positive alignment, locking and sealingReplaceable end cap100% 17-4PH Stainless Steel Hardened to 45-47Rc at 190,000psi Tensile12.5" Overall length29oz2.45" DiameterBlack anodizedFull Auto Rated (yes, actually designed for full auto)Easy to repair with engraving at the back of the canLifetime, No BS Warranty

Rex Silentium SEG12ga Modular Shotgun Suppressor

'modular':4 'rex':1,8 'seg12':7,10 'seg12ga':3 'shotgun':5 'silentium':2,9 'suppressor':6

Rex Silentium: Silent Excellence.

Rex Silentium At Pew Deals

Rex Silentium manufactures high-quality suppressors known for their performance and noise reduction. Their products are used for enhancing shooting accuracy and reducing noise.

Shop Rex Silentium offers at Pew Deals

Brand: Rex Silentium

$159.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$179.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$179.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$849.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$849.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$849.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$1,149.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$389.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$159.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$499.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$499.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$549.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$549.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$549.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$549.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$1,149.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$1,149.50

In Stock

submitted 151 days ago

Brand: Rex Silentium

$1,099.50

In Stock

submitted 151 days ago